Get a professional bike fit with this new Ergon kit for under €40
Changing saddles, getting a new bike, or trying to replicate the exact same position between a MTB and a road bike is not always easy. Ergon has just introduced the TF1 + TF2 Bike Fitting Tool Kit, a set of tools that allows you to measure, record, and transfer adjustments from one bike to another with millimeter precision.
Ergon presents a kit to adjust and copy your bike's position to the millimeter for 39.95 euros
The German brand Ergon expands its catalog of ergonomic products with a solution designed for both cyclists who make their own adjustments and bike fitting professionals. Its goal is to facilitate a task that usually requires taking numerous measurements and finding reliable reference points, especially when using different saddles or bikes with different geometries.

The new Ergon TF1 + TF2 Bike Fitting Tool Kit brings together two specific tools to measure saddle position and its relation to the rest of the bike. Both can be purchased separately, although they are also offered in a complete set with the necessary accessories for making measurements.
Ergon TF1: a common reference for measuring any saddle
RECOMENDADO
Rapha hires a jellyfish expert to develop Evenepoel’s kit for 2027
“It won’t stop a rider from winning a race”: Paul Seixas could be the next to test Van Rysel’s airbag
Stoll unveils the G32 Superfast, a new race gravel bike with 32-inch wheels weighing just 7.4 kg
"I'm not so good to follow some numbers or a plan": Jolanda Neff explains why she still enjoys mountain biking
Benidorm brings cycling’s biggest stars together for a UCI Gala that could shape the future of the WorldTour
The Giro d’Italia is on board with the new cycling Super League: “We would be willing to reach an agreement”
One of the main difficulties when changing saddles is that their length and shape can vary considerably. Therefore, measuring only from the tip does not always allow for reproducing the same position on the bike.
To solve this problem, the new Ergon TF1 Bike Fitting Tool Saddle uses a biomechanical reference point known as BMR (Biomechanical Reference).

This point is located in the section where the saddle is exactly 75 mm wide. In this way, the tool allows for identifying a comparable reference between saddles of different brands and dimensions, without relying exclusively on the position of the tip.
From that reference, the TF1 allows you to check and record several parameters:
- Saddle height.
- Inclination.
- Setback and longitudinal position.
- Alignment with respect to the bike's axis.
- Distance between the saddle and the handlebars, combining it with the corresponding measurements.
Its usefulness is particularly interesting when replacing a saddle, disassembling the bike for transport, or wanting to maintain a similar position between several bikes.

Ergon TF2: the complement for measuring setback and cockpit position
The second tool, the Ergon TF2 Bike Fitting Tool Setback, focuses on establishing precise references regarding elements such as the bottom bracket, crank arms, and handlebars.
Its design incorporates a V-shaped notch that facilitates the placement of the tool over the measurement points, seeking repeatable results regardless of the frame geometry.
With the TF2, it is possible to measure:
- Saddle setback relative to the bottom bracket.
- Saddle height.
- Stem length.
- Stem rise or drop.
- Distance between saddle and handlebars.
This second tool is particularly useful when changing bikes or modifying the cockpit configuration. It allows for comparing the dimensions of two setups without relying solely on the nominal measurements of their components.

A complete kit for 39.95 euros
Ergon sells the two tools separately, but it has also prepared a set that includes everything necessary for making basic measurements.
The TF1 + TF2 Bike Fitting Tool Kit contains:
- Ergon TF1 tool for the saddle.
- Ergon TF2 tool for bottom bracket and cockpit references.
- Measuring tape.
- Plumb bob.
- Bubble level.
Both tools are made of polypropylene and have a compact design that allows them to be easily stored in a toolbox.
The recommended price for the complete kit in Europe is 39.95 euros, while the TF1 and TF2 have a recommended price of 19.95 euros each.
The brand also offers instructions and explanatory videos to learn how to use the different measurement points, without needing advanced mechanical knowledge.
Ergon also allows for adjusting cleat positions
In addition to these new instruments, Ergon has its TP1 Cleat Tools family, designed to facilitate the placement of cleats on shoes.
These templates allow for checking and reproducing the position of the cleats and are available in versions adapted to different automatic pedal systems, both for MTB and road.

The brand also maintains its Fitting Box, developed in collaboration with cycling ergonomics specialist Dr. Kim Tofaute, with specific versions for MTB and e-MTB, road and gravel, and urban cycling or bike touring.
In any case, the new TF1 + TF2 kit does not aim to completely replace a professional biomechanical study. Its main advantage is that it allows you to measure and reproduce a previously established position with precision, something particularly practical for those who use several bikes, frequently change components, or want to maintain their adjustments from one season to another.
All the information about the new set is available on the official Ergon website.